Qos Vlan-Policy; Reset Qos Vlan-Policy - HP HSR6800 Command Reference Manual

qos vlan-policy

Use qos vlan-policy to apply a QoS policy to VLANs.
Use undo qos vlan-policy to remove the QoS policy applied to VLANs.
Syntax
qos vlan-policy policy-name vlan vlan-id-list { inbound | outbound }
undo qos vlan-policy [ policy-name ] vlan vlan-id-list { inbound | outbound }
Views
System view
Default command level
2: System level
Parameters
policy-name: QoS policy name, a string of 1 to 31 characters.
vlan-id-list: Specifies a list of up to eight VLAN IDs. A VLAN ID is in the range of 1 to 4094. You can enter
individual discontinuous VLAN IDs and VLAN ID ranges in the form of start-vlan-id to end-vlan-id, where
the start VLAN ID must be smaller than the end VLAN ID. Each item in the VLAN list is separated by a
space.
inbound: Applies the QoS policy to the incoming packets in the specified VLANs.
outbound: Applies the QoS policy to the outgoing packets in the specified VLANs.
Examples
# Apply the QoS policy test to the inbound direction of VLAN 200, VLAN 300, VLAN 400, and VLAN
500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound

reset qos vlan-policy

Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.
Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Views
User view
Default command level
1: Monitor level
Parameters
vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094.
inbound: Clears the statistics of the QoS policy applied in the inbound direction of the specified VLAN.
outbound: Clears the statistics of the QoS policy applied in the outbound direction of the specified
VLAN.
66