Ebs - HP HSR6800 Command Reference Manual

<Sysname> display fr switch-table all
Total PVC switch records:2
PVC-Name
a
b
Table 44 Command output
Field
PVC-Name
Status
Interface
DLCI
Related commands
fr switch

ebs

Use ebs to set the EBS for the FR PVCs.
Use undo ebs to restore the default.
Syntax
ebs [ inbound | outbound ] excess-burst-size
undo ebs [ inbound | outbound ]
Views
FR class view
Default command level
2: System level
Parameters
inbound: Sets the EBS for the incoming packets. This argument is available when FR traffic policing is
enabled on interfaces.
outbound: Sets the EBS for the outgoing packets. This argument is available when FR traffic policing is
enabled on interfaces.
excess-burst-size: EBS in the range of 0 to 16000000 bits. The default value of EBS is 0 bits.
Usage guidelines
EBS is the maximum amount of traffic, except CBS, that can be transmitted in the interval of Tc. When
congestion occurs to the network, the excess traffic is dropped preferentially.
If neither the inbound keyword nor the outbound keyword is specified for this command, the EBS is
effective for both incoming packets and outgoing packets.
Examples
# Set the EBS to 32000 bits for the FR class test1.
<Sysname> system-view
Status
Inactive Pos4/1/0(50)
Active
Description
Name of a switching PVC.
Connection state of the frame relay switching link.
The first interface represents a local interface, and the second interface represents a
peer interface.
The first DLCI represents a local DLCI, and the second DLCI represents a remote DLCI.
147
Interface(Dlci) <-----> Interface(Dlci)
Pos5/2/1(40)
Pos4/1/1(50)
Pos5/2/3(50)