Fr Del Inbound-Interface - HP HSR6800 Command Reference Manual

Examples
# Apply DE rule list 3 to DLCI 100 of Serial 2/0/1.
<Sysname> system-view
[Sysname]interface Serial 2/0/1
[Sysname-Serial2/0/1] fr dlci 100
[Sysname-Serial2/0/1] fr de del 3 dlci 100
Related commands
•

fr del inbound-interface

fr del protocol
•
fr del inbound-interface
Use fr del inbound-interface to configure an interface-based DE rule list. Before the incoming packets of
the specific interfaces are to be forwarded as FR packets, the DE flag bits of these packets are set to 1.
Use undo fr del inbound-interface to remove the specific DE rule from the DE rule list.
Syntax
fr del list-number inbound-interface interface-type interface-number
undo fr del list-number inbound-interface interface-type interface-number
Default
No DE rule list is created.
Views
System view
Default command level
2: System level
Parameters
list-number: DE rule list number in the range of 1 to 10.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Execute this command multiple times to add new rules to a DE rule list. Up to 100 rules can be configured
for a DE rule list. Executed once, the undo fr del inbound-interface command removes only one DE rule.
To remove a DE rule list, make sure that all the DE rules in the DE rule list are removed.
Examples
# Add a rule to DE rule list 1. The rule defines that: before the incoming packets of Serial 2/0/1 are to
be forwarded as FR packets, the DE flag bits of these packets are set to 1.
<Sysname> system-view
[Sysname] fr del 1 inbound-interface Serial 2/0/1
Related commands
fr de del
•
fr del protocol
•
151