Fr De Del - HP HSR6800 Command Reference Manual

queue-percentage: Congestion threshold, expressed in the interface queue utilization rate, which means
the percentage of the current interface queue length to the total queue length. The value range for this
argument is 1 to 100, and the default is 100.
Usage guidelines
This command is similar to the congestion-threshold command. The difference between the two
commands lies in that: this command is applicable to FR interfaces and the congestion-threshold
command is applicable to FR PVCs.
This command is applicable to only FR DCE interfaces and NNI interfaces.
Examples
# Configure Serial 2/0 to drop FR packets with the DE flag bit 1 when the current interface queues uses
more than 80% of the total queue length.
<Sysname> system-view
[Sysname]interface Serial 2/0/1
[Sysname-Serial2/0/1] fr interface-type dce
[Sysname-Serial2/0/1] fr congestion-threshold de 80
Related commands
congestion-threshold

fr de del

Use fr de del to apply a specific DE rule list to the specified FR PVC.
Use undo fr de del to remove the DE rule list from the specified FR PVC.
Syntax
fr de del list-number dlci dlci-number
undo fr de del list-number dlci dlci-number
Default
No DE rule list is applied to FR PVCs.
Views
FR interface (primary interface or subinterface) view, MFR interface view
Default command level
2: System level
Parameters
list-number: DE rule list number in the range of 1 to 10.
dlci-number: FR PVC number in the range of 16 to 1007.
Usage guidelines
Configured in primary interface view, this command applies a specific DE rule list only to the FR PVC of
the primary interface. Configured in subinterface view, this command applies a specific DE rule list only
to the subinterface.
With a DE rule list applied to an FR PVC, the DE flag bits of packets matching the DE rule list are set to
1.
150