Traffic-Shaping Adaptation - HP HSR6800 Command Reference Manual

<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] rtpq start-port 16383 end-port 16384 bandwidth 20

traffic-shaping adaptation

Use traffic-shaping adaptation to enable FRTS adaptation.
Use undo traffic-shaping adaptation to disable this function.
Syntax
traffic-shaping adaptation { becn percentage | interface-congestion number }
undo traffic-shaping adaptation { becn | interface-congestion }
Default
FRTS adaptation is enabled for traffic with the BECN flag, and 25% of the total traffic is regulated every
time.
Views
FR class view
Default command level
2: System level
Parameters
becn: Regulates the traffic of packets with the BECN flag.
percentage: Percentage of the regulated traffic to the total traffic, in the range of 1 to 30. This argument
is 25 by default.
interface-congestion: Performs traffic regulation according to the number of packets in the output queues
on the interface.
number: Number of packets in the output queue of the interface, in the range of 1 to 40.
Examples
# Enable FRTS adaptation to regulate the traffic of the FR packets with the BECN flag bit 1 and regulate
20% of the total traffic every time.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] traffic-shaping adaptation becn 20
Related commands
• fr traffic-shaping
cir allow
•
cir
•
158