Qos Trust - HP HSR6800 Command Reference Manual

qos trust

Use qos trust to configure an interface to use a particular priority field carried in packets for priority
mapping.
Use undo qos trust to restore the default priority trust mode.
Syntax
qos trust dscp
undo qos trust
Default
No trusted packet priority type is configured.
Views
Interface view, port group view
Default command level
2: System level
Parameters
dscp: Uses the DSCP value in incoming packets for priority mapping.
Usage guidelines
In Ethernet interface view, the setting takes effect on the current interface only. In port group view, the
setting takes effect on all ports in the port group.
Examples
# Set the trusted packet priority type to 802.1p priority on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos trust dscp
73