Qos Cql Protocol - HP HSR6800 Command Reference Manual

Related commands

qos cql protocol

•
qos cql queue serving
•
• qos cql queue queue-length
qos cq
•
qos cql protocol
Use qos cql protocol to assign a custom queue for IP packets that match a certain criterion.
Use undo qos cql protocol to delete the match criterion.
Syntax
qos cql cql-index protocol ip [ queue-key key-value ] queue queue-number
undo qos cql cql-index protocol ip [ queue-key key-value ]
Default
No match criterion is configured.
Views
System view
Default command level
2: System level
Parameters
cql-index: CQ list index in the range of 1 to 16.
queue queue-number: Specifies an custom queue by its number in the range of 1 to 16.
ip [ queue-key key-value ]: Classifies and enqueues IP packets. The values for the queue-key argument
and the key-value argument are displayed in
key-value argument is specified, all IP packets are enqueued.
Table 31 Values for the
queue-key
acl
fragments
greater-than
less-than
tcp
udp
When the queue-key argument is tcp or udp, the key-value argument can take either a port name or a
port number.
queue-key
argument and the
key-value
ACL number (2000 to 3999)
N/A
Length (0 to 65535)
Length (0 to 65535)
Port number (0 to 65535)
Port number (0 to 65535)
Table 31. If neither the queue-key argument nor the
key-value
argument
Description
All IP packets matching the specified ACL are enqueued.
All fragmented IP packets are enqueued.
IP packets larger than a specified value are enqueued.
IP packets smaller than a specified value are enqueued.
IP packets with a specified TCP source or destination port
number are enqueued.
IP packets with a specified UDP source or destination port
number are enqueued.
95