step 4: assemble Mounting Hardware
1.
Attach the mounting plate (A) using the provided screws and washers
(Torque 9 N∙m/75 in-lbs)
2.
Attach the extension arm (B) to mounting piece (A) with the screw, nut,
and washers.
3.
Attach the mounting bracket (C) to extension arm (B) with the screw, nut,
and washers provided.
4.
Tighten assembly (Torque 15 N∙m/130 in-lbs).
The following figure shows the full assembly attached to the unit.
All rights reserved
Page 11