Menu - KERN KFB-TM Service Manual

5 Menu

The application of the display unit as a verified weighing system requires that you short-
circuit the two contacts [K1] of the circuit board, using a jumper. To that effect, a menu for
verified weighing systems is available. For menu layout see chap. 8.2.
There is no jumper for weighing systems that cannot be verified. To that effect, a menu is
available for weighing systems that cannot be verified, Menu layout
see chap. 8.1
Navigation in the menu:
Call up menu
Select menu block
Select setting
Change settings
Acknowledge setting /
exit the menu
Return to weighing
mode
- 9 -

Switch-on balance and during the selftest press

Press ,
„PO CHK" will be displayed.

With help of
one after the other.

Confirm selected menu item by pressing
setting will be displayed.

To change to the available settings, press the navigations
keys as described in chap. 2.1.

Either save by pressing

Press repeatedly to exit menu.
, subsequently, the first menu block
, the individual menu items can be selected
or cancel by pressing
KFB-TM/KFN-TM-SH-e-1410
.
. The current
.