Product Overview; Controls - Toro TITAN HD 1500 Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Height-of-cut positions
3. Transport lock

4. Controls

5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine
Figure 6).
1. Power point
2. Choke
3. Throttle control
4. Hour meter
Figure 5
7. Seat belt
8. Fuel cap
9. Parking-brake lever
10. Mower deck
11. Caster wheel
(Figure 5
Figure 6
5. PTO Switch
6. Ignition switch
7. Switch position for optional
light kit
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
Throttle Control
The throttle control is variable between Fast and
Slow.
Choke
Use the choke to start a cold engine. Pull the choke
knob up to engage it.
Blade-Control Switch (PTO)
g036854
Use the blade-control switch (PTO) to engage the
electric clutch and drive the mower blades. Pull the
switch up to engage the blades and release. To
disengage the blades, push the blade-control switch
(PTO) down or move a motion-control lever into the
N -
EUTRAL LOCK
Ignition Switch
This switch is used to start the mower engine and has
3 positions: S
Motion-Control Levers
and
The motion-control levers are used to drive the
machine forward, reverse, and turn either direction.
Neutral-Lock Position
Use the N
EUTRAL
safety-interlock system to engage and to determine
the N
EUTRAL
Fuel-Shutoff Valve
g037119
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
14
(Figure 6).
position.
, R , and O .
TART UN FF
- position with the
LOCK
position.