Removing The Battery - Toro TITAN HD 1500 Operator's Manual

Removing the Battery

WARNING
Battery terminals or metal tools could short
against metal machine components, causing
sparks. Sparks can cause the battery gasses
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
WARNING
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Disconnect the negative battery cable (black)
from the negative (-) battery terminal
4. Slide the red terminal boot off the positive (red)
battery terminal, and remove the positive (+)
battery cable (Figure
5. Remove the rubber strap
6. Remove the battery.
-
EUTRAL LOCK
(Figure
74).
(Figure 74).
74).
57
Figure 74
g036853
g036855