Toro TITAN HD 1500 Operator's Manual page 53

5. Change the engine-oil filter
Figure 68
Note:
Ensure that the oil-filter gasket touches
the engine and then turn the filter an extra 3/4
turn.
(Figure 68).
g027477
53
6. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
69).
Servicing the Spark Plug
Service Interval: Every 100 hours/Yearly
(whichever comes first)—For
Toro engines—check the spark
plug(s).
Every 200 hours/Every 2 years (whichever
comes first)—For Toro engines—replace the
spark plug(s).
Make sure that the air gap between the center and
side electrodes is correct before installing the spark
plug. Use a spark-plug wrench to remove and install
the spark plug(s) and a gapping tool/feeler gauge to
check and adjust the air gap. Install a new spark
plug(s) if necessary.
Type: Champion RN9YC or NGK BPR6ES
Air gap: 0.76 mm (0.03 inch)
Figure 69
(Figure
g027484