Figure - Toro TITAN HD 1500 Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
This spark ignition system complies with Canadian
ICES-002
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
Because in some areas there are local, state, or
federal regulations requiring that a spark arrester be
used on the engine of this machine, a spark arrester is
available as an option. If you require a spark arrester,
contact your Authorized Toro Dealer.
Genuine Toro spark arresters are approved by the
USDA Forestry Service.
WARNING
Removing standard original equipment parts
and accessories may alter the warranty,
traction, and safety of the machine. Failure to
use original Toro parts could cause serious
injury or death. Making unauthorized changes
to the engine, fuel or venting system, may
violate EPA and CARB regulations.
Replace all parts including, but not limited
to, tires, belts, blades, and fuel system
components with original Toro parts.
For all models that do not have Toro engines,
please refer to the engine manufacturer's
information included with the machine.
Labeled power ratings are supplied by the engine
manufacturer in accordance with SAE testing and
gross/net power rating standards (J1940, J1995,
J1349).
Important:
If you are using a machine with a Toro
engine above 1500 m (5,000 ft) for a continuous
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
period, ensure that the High Altitude Kit has been
installed so that the engine meets CARB/EPA
emission regulations. The High Altitude Kit
increases engine performance while preventing
spark-plug fouling, hard starting, and increased
emissions. Once you have installed the kit, attach
the high-altitude label next to the serial decal on
the machine. Contact any Authorized Toro Service
Dealer to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate
a dealer convenient to you, access our website
at www.Toro.com or contact our Toro Customer
Care Department at the number(s) listed in your
Emission Control Warranty Statement.
Remove the kit from the engine and restore the
engine to its original factory configuration when
running the engine under 1500 m (5,000 ft). Do
not operate an engine that has been converted
for high-altitude use at lower altitudes; otherwise,
you could overheat and damage the engine.
If you are unsure whether or not your machine has
been converted for high-altitude use, look for the
following label

(Figure

2
3).
Figure 3
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
decal127-9363