Hydraulic System Maintenance; Hydraulic System Safety; Servicing The Hydraulic System - Toro TITAN HD 1500 Operator's Manual

Hydraulic System
Maintenance

Hydraulic System Safety

•
Ensure that all hydraulic-fluid hoses and
lines are in good condition and all hydraulic
connections and fittings are tight before
applying pressure to the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure
hydraulic fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
•
Seek immediate medical attention if fluid
is injected into skin. Injected fluid must be
surgically removed within a few hours by a
doctor.
Servicing the Hydraulic
System
Hydraulic Fluid Type: Toro
hydraulic fluid (preferred) or Mobil 1 15W-50 oil.
Important:
Use the fluid specified. Other fluids
could cause system damage.
Hydraulic System Capacity (with filters removed):
4.45 L (150 oz)
Checking the Hydraulic Fluid Level
Service Interval: Before each use or daily
1. Allow the hydraulic fluid to cool down. Check
the oil level when the oil is cold.
2. Check expansion reservoir and if necessary
add Toro ® HYPR-OIL
FULL COLD line.
® HYPR-OIL ™ 500
™ 500 hydraulic fluid to the
1. Engine
69
Figure 97
2. Expansion tank
g037051