Board Configuration And Power Up; Board Switch And Jumper Settings And Other Setup - Altera Stratix Memory Board II User Manual

Stratix Memory Board II

2 Board configuration and Power Up

2.1 Board switch and jumper settings and other setup

SMB2 requires a number of jumpers, switch settings, and other hardware setup
before testing should begin. See figure 1 for the location of the switches and
jumpers. See figure 2 for the location of cables and test card. This work should
be performed before applying power.
DIP Switch
S1 - 8
S1 – 7
S1 – 6
S1 – 5
S1 – 4
S1 – 3
S1 – 2
S1 – 1
S2 – 1 to 8
J11 J23, J24
p1-p3, p2-p4 p1-p2
Table 2-1 DIP Switch settings
Name
MSEL2
MSEL1
MSEL0
MAX_EN
RU_N_LU
MPGM2
MPGM1
MPGM0
USER DIP 0 -7
Table 2-2 Other Switch Settings
SW1 – POWER
OFF
Table 2-3 Jumper settings
J29 J32, J33, J34, J35, J36, J37, J38, J39, J48
p2-p3
Setting
Closed
Closed
Closed
Open
Open
Closed
Closed
Closed
Closed
p1-p2
User Guide
J49
p3-p4
4