Configuring The Maximum Number Of Equal-Cost Routes For Load-Balancing - HP MSR ASM Configuration Manual

Step
3. Enter IPv6 address family
view.
4. Enable BGP route refresh for a
peer or a peer group.
5. Enable the non-standard ORF
capability for a BGP peer or a
peer group.
6. Enter IPv6 MBGP address
family view.
7. Enable the ORF IP prefix
negotiation capability for a
BGP peer or a peer group
Table 34 Description of the send, receive, and both parameters and the negotiation result
Local parameter
send
receive
both
Configuring the maximum number of equal-cost routes for
load-balancing
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Configure the maximum
number of equal-cost routes
for load balancing.
Command
ipv6-family
peer { group-name |
ipv6-address } capability-advertise
route-refresh
peer { group-name |
ipv6-address } capability-advertise
orf non-standard
ipv6-family multicast
peer { group-name |
ipv6-address } capability-advertise
orf ip-prefix { both | receive |
send }
Peer parameter
•
receive
•
both
•
send
•
both
both
Command
system-view
bgp as-number
ipv6-family multicast
balance number
429
Remarks
N/A
Optional.
Enabled by default.
If this feature is not enabled, you
must configure this command.
Optional.
By default, standard BGP ORF
capability defined in RFC 5291
and RFC 5292 is supported.
If this feature is not enabled, you
must configure this command.
N/A
Not enabled by default.
Negotiation result
The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the
peer.
The ORF receiving capability is enabled locally and
the ORF sending capability is enabled on the peer.
Both the ORF sending and receiving capabilities
are enabled locally and on the peer.
Remarks
N/A
N/A
N/A
By default, load balancing is
disabled.