HP MSR ASM Configuration Manual page 172

[SwitchA] interface ethernet 1/3
[SwitchA-Ethernet1/3] igmp-snooping static-router-port vlan 100
[SwitchA-Ethernet1/3] quit
4. Configure Switch B:
# Enable IGMP snooping globally.
<SwitchB> system-view
[SwitchB] igmp-snooping
[SwitchB-igmp-snooping] quit
# Create VLAN 100, assign Ethernet 1/1 and Ethernet 1/2 to this VLAN, and enable IGMP
snooping in the VLAN.
[SwitchB] vlan 100
[SwitchB-vlan100] port ethernet 1/1 ethernet 1/2
[SwitchB-vlan100] igmp-snooping enable
[SwitchB-vlan100] quit
5. Configure Switch C:
# Enable IGMP snooping globally.
<SwitchC> system-view
[SwitchC] igmp-snooping
[SwitchC-igmp-snooping] quit
# Create VLAN 100, assign Ethernet 1/1 through Ethernet 1/5 to this VLAN, and enable IGMP
snooping in the VLAN.
[SwitchC] vlan 100
[SwitchC-vlan100] port ethernet 1/1 to ethernet 1/5
[SwitchC-vlan100] igmp-snooping enable
[SwitchC-vlan100] quit
# Configure Ethernet 1/3 and Ethernet 1/5 as static member ports for multicast group 224.1.1.1.
[SwitchC] interface Ethernet 1/3
[SwitchC-Ethernet1/3] igmp-snooping static-group 224.1.1.1 vlan 100
[SwitchC-Ethernet1/3] quit
[SwitchC] interface Ethernet 1/5
[SwitchC-Ethernet1/5] igmp-snooping static-group 224.1.1.1 vlan 100
[SwitchC-Ethernet1/5] quit
Verifying the configuration
# Display detailed IGMP snooping group information in VLAN 100 on Switch A.
[SwitchA] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 2 port.
160