HP MSR ASM Configuration Manual page 262

[PE3-rip-3] return
4. Configuring the P router:
# Enable IP multicast routing, configure an MPLS LSR ID, and enable the LDP capability on the
public network.
<P> system-view
[P] multicast routing-enable
[P] mpls lsr-id 2.2.2.2
[P] mpls
[P-mpls] quit
[P] mpls ldp
[P-mpls-ldp] quit
# Configure an IP address, and enable PIM-SM and LDP capability on the public network interface
Ethernet 1/1.
[P] interface ethernet 1/1
[P-Ethernet1/1] ip address 192.168.6.2 24
[P-Ethernet1/1] pim sm
[P-Ethernet1/1] mpls
[P-Ethernet1/1] mpls ldp
[P-Ethernet1/1] quit
# Configure an IP address, enable PIM-SM and LDP capability on the public network interface
Ethernet 1/2.
[P] interface ethernet 1/2
[P-Ethernet1/2] ip address 192.168.7.2 24
[P-Ethernet1/2] pim sm
[P-Ethernet1/2] mpls
[P-Ethernet1/2] mpls ldp
[P-Ethernet1/2] quit
# Configure an IP address, enable PIM-SM and LDP capability on the public network interface
Ethernet 1/3.
[P] interface ethernet 1/3
[P-Ethernet1/3] ip address 192.168.8.2 24
[P-Ethernet1/3] pim sm
[P-Ethernet1/3] mpls
[P-Ethernet1/3] mpls ldp
[P-Ethernet1/3] quit
# Configure an IP address for Loopback 1 and enable PIM-SM on the interface.
[P] interface loopback 1
[P-LoopBack1] ip address 2.2.2.2 32
[P-LoopBack1] pim sm
[P-LoopBack1] quit
# Configure Loopback 1 as a C-BSR and C-RP on the public network.
[P] pim
[P-pim] c-bsr loopback 1
[P-pim] c-rp loopback 1
[P-pim] quit
# Configure OSPF.
[P] ospf 1
250