Verifying the configuration
Use the display pim ipv6 interface command to display IPv6 PIM information on each interface. For
example:
# Display IPv6 PIM information on Router A.
[RouterA] display pim ipv6 interface
Interface
Eth1/1
Ser2/0
Pos5/0
# Display information about the BSR and locally configured C-RP on Router A.
[RouterA] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Accept Preferred
Uptime: 00:04:22
Expires: 00:01:46
# Display information about the BSR and locally configured C-RP on Router D.
[RouterD] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 4002::1
Priority: 10
Hash mask length: 128
State: Candidate
Candidate RP: 4002::1(Pos5/0)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
# Display information about the BSR and locally configured C-RP on Router E.
[RouterE] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:01:10
Next BSR message scheduled at: 00:01:48
Candidate BSR Address: 1003::2
Priority: 20
NbrCnt HelloInt
DR-Pri
0
30
1
1
30
1
1
30
1
348
DR-Address
1001::1
(local)
1002::2
1003::2