Configuring Bidir-Pim; Bidir-Pim Configuration Task List; Configuration Prerequisites - HP MSR ASM Configuration Manual

Configuring BIDIR-PIM

This section describes how to configure BIDIR-PIM.

BIDIR-PIM configuration task list

Task
Enabling PIM-SM
Enabling BIDIR-PIM
Configuring an RP
Configuring a BSR
Configuring administrative scoping
Configuring common PIM features

Configuration prerequisites

Before you configure BIDIR-PIM, complete the following tasks:
Configure a unicast routing protocol so that all devices in the domain can reach each other.
•
Determine the IP address of a static RP and the ACL that defines the range of the multicast groups
•
to be served by the static RP.
Determine the C-RP priority and the ACL that defines the range of multicast groups to be served by
•
each C-RP.
• Determine the legal C-RP address range and the ACL that defines the range of multicast groups to
be served.
Determine the C-RP-Adv interval.
•
Determine the C-RP timeout timer.
•
• Determine the C-BSR priority.
Determine the hash mask length.
•
Determine the ACL defining the legal BSR address range.
•
Determine the BS period.
•
Determine the BS timeout timer.
•
Configuring a static RP
Configuring a C-RP
Enabling auto-RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring a BIDIR-PIM domain border
Configuring global C-BSR parameters
Configuring C-BSR timers
Disabling BSM semantic fragmentation
Enabling administrative scoping
Configuring an admin-scoped zone boundary
Configuring C-BSRs for each admin-scoped
zone and the global-scoped zone
71
Remarks
Required.
Required.
Required.
Use any method.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.