HP MSR ASM Configuration Manual page 202

[RouterA-msdp] peer 10.110.3.2 connect-interface ethernet 1/1
[RouterA-msdp] peer 10.110.6.2 connect-interface ethernet 1/2
[RouterA-msdp] static-rpf-peer 10.110.3.2 rp-policy list-dg
[RouterA-msdp] static-rpf-peer 10.110.6.2 rp-policy list-dg
[RouterA-msdp] quit
# Configure Router A as the MSDP peer and static RPF peer of Router D.
[RouterD] ip ip-prefix list-a permit 10.110.0.0 16 greater-equal 16 less-equal 32
[RouterD] msdp
[RouterD-msdp] peer 10.110.1.1 connect-interface pos 5/0
[RouterD-msdp] static-rpf-peer 10.110.1.1 rp-policy list-a
[RouterD-msdp] quit
# Configure Router A as the MSDP peer and static RPF peer of Router G.
[RouterG] ip ip-prefix list-a permit 10.110.0.0 16 greater-equal 16 less-equal 32
[RouterG] msdp
[RouterG-msdp] peer 10.110.2.1 connect-interface ethernet 1/1
[RouterG-msdp] static-rpf-peer 10.110.2.1 rp-policy list-a
[RouterG-msdp] quit
Verifying the configuration
Use the display bgp peer command to display the BGP peering relationships between the routers. Router
A does not display any information, which means that no BGP peering relationship has been established
between Router A and Router D, or between Router A and Router G.
When the multicast source in PIM-SM 1 (Source 1) and the multicast source in PIM-SM 2 (Source 2) send
multicast information, receivers in PIM-SM 1 and PIM-SM 3 can receive the multicast data. You can use
the display msdp brief command to display brief information about MSDP peering relationship between
the routers. For example:
# Display brief information about MSDP peers on Router A.
[RouterA] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured
2
Peer's Address
10.110.3.2
10.110.6.2
# Display brief information about MSDP peers on Router D.
[RouterD] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured
1
Peer's Address
10.110.1.1
# Display brief information about MSDP peers on Router G.
[RouterG] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured
Up Listen
2 0
State Up/Down time
Up 01:07:08
Up 00:16:39
Up Listen
1 0
State Up/Down time
Up 01:07:09
Up Listen
Connect Shutdown
0 0
AS SA Count
? 8
? 13
Connect Shutdown
0 0
AS SA Count
? 8
Connect Shutdown
190
Down
0
Reset Count
0
0
Down
0
Reset Count
0
Down