HPE FlexFabric 5950 Series Configuration Manual page 404

Step
view.
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7. Redistribute remote site
routes advertised by the
PE.
2. Configure a VPN site:
Step
1. Enter system view.
2. Enter BGP instance view.
3. Configure the MCE as an
EBGP peer.
4. Enter BGP IPv6 unicast
address family view.
5. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
6. Redistribute the IGP routes
of the VPN.
C onfiguring IBGP between an MCE and a VPN site
5 8 2 B
To use IBGP between an MCE and a VPN site, you must configure a BGP peer for each IPv6 VPN
instance on the MCE, and redistribute the IGP routes of each VPN instance on the VPN site.
1. Configure the MCE:
Step
1. Enter system view.
2. Enter BGP instance view.
3. Enter BGP-VPN instance
view.
4. Configure an IBGP peer.
5. Enter BGP-VPN IPv6
unicast address family
view.
6. Enable BGP to exchange
Command
peer { group-name |
ipv6-address [ prefix-length ] }
enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value
| route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number [ instance
instance-name ]
[ multi-session-thread ]
peer { group-name |
ipv6-address [ prefix-length ] }
as-number as-number
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address [ prefix-length ] }
enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value
| route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number [ instance
instance-name ]
[ multi-session-thread ]
ip vpn-instance
vpn-instance-name
peer { group-name |
ipv6-address [ prefix-length ] }
as-number as-number
address-family ipv6 [ unicast ]
peer { group-name |
396
Remarks
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no route
redistribution is configured.
Remarks
N/A
N/A
By default, no BGP peers exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.
A VPN site must advertise IPv6
VPN network addresses it can
reach to the connected MCE.
Remarks
N/A
By default, BGP is not enabled.
N/A
By default, no BGP peers or
peer groups exist.
N/A
By default, BGP does not