HPE FlexFabric 5950 Series Configuration Manual page 209

Mpls
Hide thumbs Also See for FlexFabric 5950 Series:
Table of Contents

Advertisement

Step
SNMP context for the VPN
instance.
A ssociating a VPN instance with an interface
4 6 4 B
After creating and configuring a VPN instance, associate the VPN instance with the interface
connected to the CE.
To associate a VPN instance with an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Associate a VPN instance
with the interface.
C onfiguring route related attributes for a VPN instance
4 6 5 B
Step
1.
Enter system view.
2.
Enter VPN instance
view or IPv4 VPN view
3.
Configure route targets.
4.
Set the maximum
number of active routes.
5.
Apply an import routing
policy.
Command
context-name
Command
system-view
interface interface-type
interface-number
ip binding vpn-instance
vpn-instance-name
Command
system-view
Enter VPN instance view:
ip vpn-instance
vpn-instance-name
Enter IPv4 VPN view:
a. ip vpn-instance
vpn-instance-name
b. address-family ipv4
vpn-target vpn-target&<1-8> [ both |
export-extcommunity |
import-extcommunity ]
routing-table limit number
{ warn-threshold | simply-alert }
import route-policy route-policy
201
Remarks
configured.
Remarks
N/A
N/A
By default, an interface is not
associated with a VPN instance
and belongs to the public network.
The ip binding vpn-instance
command deletes the IP address
of the current interface. You must
reconfigure an IP address for the
interface after configuring the
command.
Remarks
N/A
Configurations made in VPN
instance view apply to both IPv4
VPN and IPv6 VPN.
IPv4 VPN prefers the
configurations in IPv4 VPN view
over the configurations in VPN
instance view.
By default, no route targets are
configured.
By default, the number of active
routes in a VPN instance is not
limited.
Setting the maximum number of
active routes for a VPN instance
can prevent the PE from learning
too many routes.
By default, all routes matching the
import target attribute are
accepted.
The specified routing policy must
have been created.
For information about routing
policies, see Layer 3—IP Routing
Configuration Guide.

Advertisement

Table of Contents
loading

Table of Contents