HPE FlexFabric 5950 Series Configuration Manual page 263

[PE3-bgp-default-vpn1] quit
[PE3-bgp-default] quit
# Configure PE 4 and CE 4 in the same way that PE 3 and CE 3 are configured. (Details not
shown.)
5. Configure MP-IBGP peer relationship between the PEs of the customer carrier to exchange the
end customers' VPN routes:
# Configure PE 3.
[PE3] bgp 100
[PE3-bgp-default] peer 6.6.6.9 as-number 100
[PE3-bgp-default] peer 6.6.6.9 connect-interface loopback 0
[PE3-bgp-default] address-family vpnv4
[PE3-bgp-default-vpnv4] peer 6.6.6.9 enable
[PE3-bgp-default-vpnv4] quit
[PE3-bgp-default] quit
# Configure PE 4 in the same way that PE 3 is configured. (Details not shown.)
V erifying the configuration
4 9 1 B
1. Display the public network routing table and VPN routing table on the provider carrier PEs, for
example, on PE 1:
# Verify that the public network routing table contains only routes of the provider carrier
network.
[PE1] display ip routing-table
Destinations : 14
Destination/Mask
0.0.0.0/32
3.3.3.9/32
4.4.4.9/32
30.1.1.0/24
30.1.1.0/32
30.1.1.1/32
30.1.1.255/32
127.0.0.0/8
127.0.0.0/32
127.0.0.1/32
127.255.255.255/32 Direct
224.0.0.0/4
224.0.0.0/24
255.255.255.255/32 Direct
# Verify that the VPN routing table contains the internal routes of the customer carrier network,
but it does not contain the VPN routes that the customer carrier maintains.
[PE1] display ip routing-table vpn-instance vpn1
Destinations : 18
Destination/Mask
0.0.0.0/32
1.1.1.9/32
Routes : 14
Proto Pre Cost
Direct 0 0
Direct 0 0
IS_L1 15 10
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
0 0
Direct 0 0
Direct 0 0
0 0
Routes : 18
Proto Pre Cost
Direct 0 0
IS_L1 15 20
255
NextHop Interface
127.0.0.1 InLoop0
127.0.0.1 InLoop0
30.1.1.2 Vlan12
30.1.1.1 Vlan12
30.1.1.1 Vlan12
127.0.0.1 InLoop0
30.1.1.1 Vlan12
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
0.0.0.0 NULL0
0.0.0.0 NULL0
127.0.0.1 InLoop0
NextHop Interface
127.0.0.1 InLoop0
11.1.1.1 Vlan11