VEGADIF 65 • Foundation Fieldbus
4.8 Mounting external housing
1
Mark the holes according to the following drilling template
2
Depending on the mounting surface, fasten the wall mounting
plate with 4 screws
Fig. 28: Drilling template - wall mounting plate
Mount the wall mounting plate so that the cable entry of the socket
housing points downward. The socket housing can be displaced by
180° to the wall mounting plate.
4.9 Installation control
Check the following after mounting the instrument:
Did you tighten all screws?
l
Closing screws and ventilation valves closed
l
90 mm (3.54")
70 mm (2.76")
3 mm
(0.12")
4 Mounting
8 mm
(0.32")
33