This symbol indicates special instructions for Ex applications. List The dot set in front indicates a list with no implied sequence. à Action This arrow indicates a single action. Sequence Numbers set in front indicate successive steps in a procedure. Electronics module • VEGADIF 65...
The environment management system is certified according to DIN EN ISO 14001. Please help us fulfil this obligation by observing the environmental instructions in this manual: Chapter "Packaging, transport and storage" Chapter "Disposal" Electronics module • VEGADIF 65...
Documentation this operating instructions manual 3.2 Principle of operation Application area The electronics module VEGADIF 65 is suitable for exchange in differential pressure transmitter VEGADIF 65. 3.3 Packaging, transport and storage Packaging Your instrument was protected by packaging during transport. Its capacity to handle normal loads during transport is assured by a test according to DIN EN 24180.
4 Mounting 4.1 General instructions Meas. cell and proces- The pressure transmitters VEGADIF 65 are equipped with a two-part electronics: the meas. cell and the processing electronics. The meas. sing electronics cell electronics in the process fitting is not accessible to the user. The processing electronics, as an electronics module, is located in the housing.
Page 7
Unscrew housing cover of the electronics compartment Disconnect the connection cables according to the operating instructions manual of the respective sensor Loosen the two holding screws with a screwdriver (Torx size T 10 or slot size 4) Electronics module • VEGADIF 65...
Page 8
Connect the connection cables according to the operating instructions manual of the respective sensor Screw the housing cover on The electronics exchange is now finished. As a rule, the exchange of the electronics must be documented internally when used in Ex applications. Electronics module • VEGADIF 65...
Internet (see "Load sensor data"). Load sensor data Move via www.vega.com to the item "serial number search". The order data of the sensor will be displayed after entering the serial number. Below the order data you can find "Sensor data for Service DTM" as XML file.
If a repair is necessary, please proceed as follows: You can download a return form (23 KB) from our Internet homepage www.vega.com under: "Downloads - Forms and certificates - Repair form". By doing this you help us carry out the repair quickly and without having to call back for needed information.
Correct disposal avoids negative effects to persons and environment and ensures recycling of useful raw materials. Materials: see chapter "Technical data" If you have no way to dispose of the replacement component properly, please contact us concerning return and disposal. Electronics module • VEGADIF 65...
8 Supplement 8 Supplement 8.1 Technical data Technical data can be found in the operating instructions manual of the respective sensor. Electronics module • VEGADIF 65...
Need help?
Do you have a question about the VEGADIF 65 and is the answer not in the manual?
Questions and answers