Mounting And Connection Instructions - Vega VEGADIF 65 Operating Instructions Manual

4 Mounting
Connection plus/minus
side
Mounting arrangement
18

4.3 Mounting and connection instructions

When connecting the VEGADIF 65 to the measurement loop, take
note of the plus/minus side of the process component. The plus side is
marked with a "+", the minus side with a "-" on the process component
next to the oval flanges.
Fig. 10: Marking for plus/minus side on the process component
1
Plus side
2
Minus side
The following illustration shows the elements for a tube mounting and
an example for a mounting arrangement with valve block.
+ –
2
1
VEGADIF 65 • Foundation Fieldbus