Parameter Adjustment With Pactware; Parameter Adjustment With Ams; Saving The Parameter Adjustment Data - Vega VEGADIF 65 Operating Instructions Manual

7 Operating with PACTware and other adjustment programs
62
Necessary components:
VEGADIF 65
l
PC with PACTware and suitable VEGA DTM
l
VEGACONNECT
l
Power supply unit or processing system
l

7.2 Parameter adjustment with PACTware

Further setup steps are described in the operating instructions manual
"DTM Collection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGADIF 65, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also
available on this CD.
In addition, this DTM Collection incl. the basic version of PACTware
can be downloaded free of charge from the Internet. Move via www.
vega.com and "Downloads" to "Software".

7.3 Parameter adjustment with AMS™

Device descriptions for VEGADIF 65 will be available as DD for the
adjustment program AMS™. They are available as a free-of-charge
download from the Internet.
Go via www.vega.com and "Downloads" to the item "Software".

7.4 Saving the parameter adjustment data

It is recommended to document or save the parameter adjustment
data. That way they are available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
VEGADIF 65 • Foundation Fieldbus