Housing Removal
This section describes how to remove the cases and the rear frame.
Case Removal
1.
Remove the video controller board (C125 MAIN board). (Refer to pages 3-7
and 3-8.)
2.
Open the top cover.
cartridge to protect it from light or place it in a dark area.
3.
Remove the control panel. (Refer to page 3-10.)
4.
Remove the paper cover.
5.
Remove 3 CC (M3 x 8) screws for the paper guide case, and remove the paper
guide case.
6.
Loosen 2 CC (M3 x 8) screws and the front cover.
7.
Loosen 1 CCB (M3 x 8) screw, remove 2 CC (M3 x 8) screws, and remove the
right cover.
8.
Remove 3 CC (M3 x 8) screws and the left cover.
9.
Remove the top cover.
EPSON ActionLaser 1600 Service Manual
Remove the imaging cartridge. Cover the imaging
Disassembly and Assembly
3-11