High-Voltage Supply Board (Pwb-F) Removal - Epson ActionLaser 1600 Service Manual

High-Voltage Supply Board (PWB-F) Removal

1.
Open the top cover.
cartridge to protect it from light or place it in a dark area.
2. Remove the control panel. (Refer to page 3-10.)
3. Remove the paper cover.
4. Remove the right cover and left cover. (Refer to pages 3-11 and 3-12.)
5. Remove the top cover. (Refer to pages 3-11 and 3-12.)
6. Remove the rear frame. (Refer to page 3-13.)
7. Disconnect connectors CN1, CN3, the red wire terminal, and the black wire
terminal on the high-voltage supply board (PWB-F).
8. Remove 3 CP (M3 x 8) screws on the high-voltage supply board, and remove
the high-voltage supply board (PWB-F)
Figure 3-15. Removing the High-Voltage Supply Board
EPSON ActionLaser 1600 Service Manual
Remove the imaging cartridge. Cover the imaging
Disassembly and Assembly
3-19