Disassembly and Assembly
Be careful not to scratch the surface of the upper fusing roller.
Remove 2 CC (M3 x 6) screws on the guide plate, and remove the guide plate.
6.
Remove 2 springs and 2 bushings on the lower fusing roller, and remove the
7.
lower fising roller.
Remove 2 C-rings and 2 bushings on the upper fusing roller, and remove the
8.
upper fusing roller.
Figure 3-20. Disassembling the Fusing Unit 2
3-24
Caution
EPSON ActionLaser 1600 Service Manual