Control Panel Removal - Epson ActionLaser 1600 Service Manual

Disassembly and Assembly

Control Panel Removal

1. Open the top cover.
cartridge to protect it from light or place it in a dark area.
2. Remove 1 CC (M3 x 8) screw from the control panel.
3. Lift the control panel, and then remove connector CN3 on the engine controller
board (PWB-A).
4. Remove the control panel.
Figure 3-7. Removing the Control Panel
3-10
Remove the imaging cartridge. Cover the imaging
EPSON ActionLaser 1600 Service Manual