Main Motor (Ml) Removal - Epson ActionLaser 1600 Service Manual

Disassembly and Assembly

Main Motor (Ml) Removal

1. Open the top cover.
cartridge to protect it from light or place it in a dark area.
2. Remove the control panel. (Refer to page 3-10.)
3. Remove the paper cover
4. Remove the right cover and left cover. (Refer to pages 3-11 and 3-12.)
5. Remove the top cover. (Refer to pages 3-11 and 3-12.)
6. Remove the rear frame. (Refer to page 3-13.)
7. Remove 3 CP(S)(P1) (M3 x 6) screws for main motor (Ml).
8. Lift main motor (Ml), and disconnect the connector for main motor (Ml).
3-20
Remove the imaging cartridge. Cover the imaging
Figure 3-16. Removing the Main Motor
EPSON ActionLaser 1600 Service Manual