Configuring Pair Management Servers - Hitachi G1000 User Manual

Result
The quorum disk is created and virtualized for both the primary and
secondary storage, and can be confirmed by clicking Show Details.
Related topics
• About global-active device setup on page 5-2

Configuring pair management servers

Configure the command devices for the pair management servers from the
primary and secondary storage systems. Command devices are used to
communicate pair management directives.
Prerequisites
The primary and secondary storage systems have been selected.
Procedure
1 Open the global-active device setup window:
.
¢
¢
2 From Configure Pair Management Server, click Allocate Volumes for
.
the primary storage system.
3 In the Allocate Volumes dialog box, verify that the Storage System is
.
correct.
4 For Host, select the pair management server for the storage system.
.
5 Click Advanced Options, verify that Command Device is checked, and
.
that User Authentication is Enabled.
6 Click Show Plan and confirm that the information in the plan summary is
.
correct. If changes are required, click Back.
7 (Optional) Update the task name and provide a description.
.
8 (Optional) Expand Schedule to specify the task schedule.
.
You can schedule the task to run immediately or later. The default setting
is Now.
9 Click Submit.
.
If the task is scheduled to run immediately, the process begins.
10 (Optional) Check the progress and result of the task on the Tasks &
.
Alerts tab. Click the task name to view details of the task.
11 Repeat steps 2 through 10 for the secondary storage system. For Host,
.
be sure to specify the pair management server for the secondary storage
system.
5-8
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
From the Actions menu, select Set up Global-Active Device
On the Replication tab, General Tasks, select Set up Global-
Active Device
Using Hitachi Command Suite to set up global-active device