Editing Virtual Channels - Polycom SoundStructure C16 Design Manual

Editing Virtual Channels

button as shown in the following figure.
Any of the settings for virtual channels can be adjusted by either adjusting the
virtual channels individually or by adjusting the virtual channel group settings.
To add or delete additional virtual channels, click the "Edit Channels" button
on the Channels page as highlighted in the following figure. Designs may be
adjusted to add more inputs or outputs up to the limit of the number of phys-
ical inputs and outputs of the hardware that was selected to implement the
design.
The Edit Channels button will open the input and output channel selection
window and allow the designer to add or remove virtual channels as shown
in the following figure. If virtual channels are added, they will appear on the
Customizing SoundStructure Designs
5 - 7