Dynamic Ip Addresses - Polycom SoundStructure C16 Design Manual

Polycom speaker system user manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Dynamic IP Addresses

By default, the SoundStructure device accepts an IP address from a DHCP

server. Once assigned, IP addresses can be determined with the SoundStruc-

ture Studio software via the SoundStructure device discovery method. To

determine the IP address, connect to the device using the Connect to Devices

option as shown in the following figure.

SoundStructure Studio will display a list of systems found on the network

interface specified by the Search Network option. The SoundStructure sys-

tems that are found will be shown with their system name, IP addresses, and

MAC addresses as shown in the following figure.

Do you have a question about the SoundStructure C16 and is the answer not in the manual?