Polycom SoundStructure C16 Design Manual page 375

set mic_in_gain "Table
Mic 1" 48
Command
set mute "Amplifier" 1
get mute "Table Mic 1"
set mute "Mics" 1
val mic_in_gain "Table
Mic 1" 48
mute Digital Mute
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Description
This parameter sets the mute status of the virtual channel. A value of 0
indicates the virtual channel is unmuted, while a value of 1 indicates it is
muted.
Examples
Response
val mute "Amplifier" 1
val mute "Table Mic 1" 1
val mute "Table Mic 1" 1
val mute "Table Mic 2" 1
val mute "Table Mic 3" 1
val mute "Table Mic 4" 1
val mute "Mics" 1
Sets the analog preamp gain to 48dB for input channel
"Table Mic 1".
Argument value
Virtual Channel
Boolean
Read/Write
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Signal Generator, Submix, ConferenceLink Aux
Input, ConferenceLink Aux Output
Mono, Stereo
0
Description
Sets the mute on the "Amplifier" virtual channel to true --
the channel is muted.
Queries the mute status on the "Table Mic 1" virtual
channel to see if the channel is muted. The value 1
means it is muted, 0 means it is not muted
Query the current value of the mute of the virtual channel
group "Mics" which has four microphones as group
members, "Table Mic 1", "Table Mic 2", "Table Mic 3", and
"Table Mic 4".
Command Protocol Reference Guide
A - 33