Installation Options - Polycom SoundStructure C16 Design Manual

Polycom speaker system user manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Installation Options

PIN 5: GROUND

PIN 5: GROUND

There are several installation options available depending on whether tabletop

or ceiling microphones are being used. The following figure shows typical

wiring options using the Polycom SKUs highlighted with the dashed boxes for

tabletop microphones and ceiling microphone arrays. These SKU's include the

cables that are shown within the dashed boxes and are summarized in the

table below.

2215-23327-001

2215-23809-001

2215-23809-002

2215-23810-001

2215-23810-002

For reference, the Walta connector is the flat connector that is on the side of the

tabletop microphone arrays and the RJ45 connector is compatible with the con-

nectors on the rear of the SoundStructure device and on the digital ceiling

microphone array.

Tabletop microphone array with 25' Walta to Walta cable

Black ceiling microphone array kit

White ceiling microphone array kit

Black ceiling microphone array extension kit

White ceiling microphone array extension kit

Connecting Over Conference Link2

Show Quick Links

Table of Contents