Polycom SoundStructure C16 Design Manual page 228

Polycom speaker system user manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Step 2 - Select Outputs

Select a mono amplifier as the output source. The VTX1000 output will be

automatically defined when the VTX1000 input is defined.

Step 3 - Select Devices

Select the equipment required to create this design. By default the SoundStruc-

ture C16 is selected. Note that no telephony card is required as the VTX1000

will be the telephony interface.

Troubleshooting

Do you have a question about the SoundStructure C16 and is the answer not in the manual?