Polycom SoundStructure C16 Design Manual page 455

Command
set ser_baud 1 9600
ir_key_held Key Held On IR Remote
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Description
When queried, this parameter returns the keycode value of the last key that
was held on the IR remote. As an event, a status message is generated at an
interval of approximately 100 ms whenever an key is held on the IR remote.
ser_baud RS-232 Baud Rate
Argument
Channel Type
Value Type
Read/Write Mode
Values
Description
This parameter sets the baud rate for the RS-232 port. Hardware flow control
should be enabled for baud rates over 9600 bps (see the ser_flow parameter).
Examples
Response
val ser_baud 1 9600
Argument value
Virtual Channel
Integer
Read/Write
Infrared Remote Input
Control
Minimum: 0, Maximum: 255
Argument value
Device-Specific System
List
Read/Write
9600 : 9600 bits per second (default)
19200 : 19200 bits per second
38400 : 38400 bits per second
57600 : 57600 bits per second
115200 : 115200 bits per second
Description
Sets the serial port baud rate on device 1 (the first
device) to 9600.
Command Protocol Reference Guide
A - 113