Polycom SoundStructure C16 Design Manual page 373

Command
set fader "Amplifier" 1
get fader "Amplifier"
set fader max "Amplifier"
10
set fader min "Amplifier"
-15
inc fader "Amplifier" 2
inc fader "Amplifier" 0.5
dec fader "Amplifier" 2.5
Argument
System Limits
Default
User Limits
Supported
Description
This parameter sets the fader level (in dB) in the digital domain.
Examples
Response
val fader "Amplifier" 1
val fader "Amplifier" 1
val fader max "Amplifier"
10
val fader min "Amplifier"
-15
val fader "Amplifier" 3
val fader "Amplifier" 3.5
val fader "Amplifier" 1
line_out_gain Line Output Gain
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Argument value
Minimum: -100.0, Maximum: 20.0, Resolution: 0.1
0.0
Yes
Description
Sets the fader on the "Amplifier" virtual channel to 1.
Returns the current value of the fader on the "Amplifier"
virtual channel.
Sets the maximum fader value to +10 on the "Amplifier"
virtual channel. Any commands to set the fader above
+10 will have the value set to 10.
Sets the minimum fader value to -15 on the "Amplifier"
virtual channel. Any commands to set the fader below -15
will have the value set to -15.
Increments the current value of the fader by 2dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Increments the current value of the fader by 0.5dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Decrements the current value of the fader by 2.5dB on
the "Amplifier" virtual channel and returns the current
value of the fader.
Argument value
Virtual Channel
Floating-Point
Read/Write
Conferencing Line Output, Sound Reinforcement Line
Output
Command Protocol Reference Guide
A - 31