Digital Microphone Firmware Updates - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Digital Microphone Firmware Updates

6 - 14
The following table shows the number of analog inputs that are available
based on the number of microphone arrays that are used in a system. As an
example, a SoundStructure C16 supports 16 analog inputs. When used with
two microphone arrays, 10 analog inputs are still available for use with other
analog inputs including microphones, program audio, etc.
# HDX
microphones
POLYCOM
IN OUT
LAN C-LINK2 OBAM
In SoundStructure only applications, connect the digital array microphones to the
right CLink2 port (the port closest to the OBAM interface).
In SoundStructure and HDX applications, connect the HDX to the left CLink2 port
on SoundStructure and connect digital microphones to either CLink2 port on the
HDX system.
Version 2.0.1 of HDX supports 3 microphone arrays when connected to the
SoundStructure device over CLink2.
When the digital microphone arrays are connected directly to the SoundStruc-
ture device, the version of firmware on the microphones will be compared to
the version of microphone firmware included within the SoundStructure
# of available analog inputs
with SoundStructure
C16
0 16
1 13
2 10
3 7
4 4
POLYCOM POLYCOM
PIN 2: TXD
1 2 3
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
RS-232 REMOTE CONTROL 1
1 2 3
12V REMOTE CONTROL 2
IR
C12 C8
12 8
9 5
6 2
3 --
0 --
POLYCOM
4 5 6 7 8 9 10 11 12 13 14 15 16
4 5 6 7 8 9 10 11 12 13 14 15 16
SoundStructure C16 TM