Polycom Pano App; Install Application Software; Installation Package Formats - Polycom Pano User Manual

Hide thumbs Also See for Pano:

Table of Contents

Polycom Pano App

The Polycom® Pano™ App lets you wirelessly share content from a computer that is connected to a

Pano system or Polycom video system over an IP network.

You can share your screen or a single application from your computer.

Remember the following when using the Pano App:

•

Mac systems share only video to Pano systems and Polycom video systems.

•

You can cast content with both audio and video to Pano systems only. For other Polycom video

systems, only video is supported.

•

Any desktop device resolution with 32-bit color is supported.

•

Depending on your device configurations and the Polycom video system it's connected to, the

Pano App may scale your content to different resolutions.

•

The Pano App includes an auto discovery feature that allows you to detect nearby Pano

systems.

You can download the Content App software from Polycom Support to install on your device.

Procedure

1 Go to

Polycom Support

Telepresence and Video.

2 Select a version according to your user type and operating system, then download the

installation package to your local disk.

3 Launch the installation package and follow the onscreen instructions.

The Content App installation package is available in different formats, depending on your user type and

operating system.

Printed from Polycom, Inc. (http://documents.polycom.com)

and select Polycom Content App from Documents & Software >

Page 24

Table of Contents