Download and Install Polycom
You need to download and install the Polycom
can use it to show content.
Procedure
1. On a computer, go to the
2. Download the People+Content IP software for Mac or PC.
3. Open the zip file and click on the application installation.
4. Follow the instructions in the installation wizard.
Share Content using People+Content IP
After you download and install People+Content IP, you are ready to share content.
Procedure
1. On your computer, do one of the following:
•
On a Windows computer, navigate to My Computer and click the People+Content IP
folder.
•
On a Mac computer, navigate to Finder then search for and run the People+Content IP
application.
2. Enter the IP address or host name of the RealPresence Trio 8800 system and the meeting
password, if one is set.
3. Click Connect.
4. Open the content you want to show and click
Stop Sharing Content with People+Content IP
When you are done showing content, make sure you stop People+Content IP.
Procedure
1. Click
in the People+Content IP application.
Share Content with People+Content IP over USB
You can connect your Windows or Mac computer over USB to the system and show content using the
People+Content IP application. Video and data sent using the People+Content IP application is sent over
the USB cable and no network connection is required. This is useful for environments where guest IP
access is not allowed.
Procedure
1. Connect a USB cable from the USB port on the RealPresence Trio 8800 to the USB port on your
computer.
A folder with the People+Content IP application opens automatically.
Polycom, Inc.
®
People+Content
®
People+Content
Polycom People+Content IP
.
Sharing Content on RealPresence Trio 8800
™
Technology
™
technology on a computer before you
page.
42