Video Call Settings
You can update video settings to change the way video calls display on your RealPresence Trio 8800
system. Note that if you update settings during a call, the new settings apply to the next call and not the
current call.
Set the Call Rate for Video Calls
You can set the maximum call rate to use for a video call, and the selected call rate applies to your next
video call.
Your system administrator can set a maximum call rate for video calls, and you cannot select a call rate
above this limit. You can choose a call rate between 128 kbps and 768 kbps. The default setting is 512
kbps.
Procedure
1. Navigate to Settings > Basic > Call Rate.
2. From the Call Rate screen, select the maximum call rate you want to use for video calls.
Change Video Clarity
You can change the Target Frame Rate to improve video clarity.
The Target Frame Rate sets how smoothly your video displays. You can set a rate between 5 (least
smooth) and 30 (smoothest). The default rate is 30.
Procedure
1. Navigate to Settings > Basic > Video.
2. Select Camera Settings > Target Frame Rate and tap Up or Down to adjust the frame rate.
Set the Video Layout for the Meeting
During a video call, you can choose how video from meeting participants display on the monitor.
You can choose any of the following meeting layout options:
•
Auto (default)—The system chooses the best layout for the call.
•
Gallery View—Up to five meeting participants display. If content is displayed when the maximum
number of participants is active, the content replaces one participant. When there are less than five
participants, self-view displays.
•
Picture-in-Picture—Only self-view or the active speaker display. The PIP displays in or on the
meeting content.
•
Fullscreen—The video of the active speaker or the meeting content displays in full screen.
Procedure
1. During a video call, tap Layout.
2. Select a layout option.
Polycom, Inc.
Video Calls on RealPresence Trio 8800
33
Need help?
Do you have a question about the RealPresence Trio 8500 and is the answer not in the manual?