Reduction Case Oil; Recommended Oil; Oil Level Check; Oil Change - Honda GX270UT2 Service Manual

Hide thumbs Also See for GX270UT2:
Table of Contents

Advertisement

62Z5F00Z.book 3 ページ 2010年6月23日 水曜日 午後2時57分
REDUCTION CASE OIL (1/2 reduction
unit with clutch)

Oil level check

Place the engine on a level surface.
Remove the reduction oil cap / oil level gauge (1), and wipe the oil level
gauge clean.
Insert the oil level gauge without screwing it into the oil filler neck (2).
Remove the oil level gauge and check oil level shown on the oil level gauge.
If the oil level is low, fill with recommended oil to the upper level (3) of the oil
level gauge.
SAE 10W - 30 is recommended for general use. Other viscosities shown in
the chart may be used when the average temperature in your area is within
the recommended range.

RECOMMENDED OIL:

SAE 10W-30 API service classification SE or later
Tighten the oil level gauge securely.

Oil Change

Drain the oil in the engine while the engine is warm. Warm oil drains quickly
and completely.
Place the engine on a level surface, and place a suitable container under
the drain plug bolt.
Remove the reduction oil cap / oil level gauge (1), drain plug bolt (2), and
drain plug washer (3) to drain the oil into the suitable container.
Please dispose of used oil in a manner that is compatible with the environ-
ment. We suggest you take used oil in a sealed container to your local recy-
cling center or service station for reclamation. Do not throw it in the trash,
pour it on the ground, or pour it down a drain.
Used engine oil contains substances that have
been identified as carcinogenic. If repeatedly left in
contact with the skin for prolonged periods, it may
cause skin cancer. Wash your hands thoroughly
with soap and water as soon as possible after con-
tact with used engine oil.
Install a new drain plug washer and tighten the drain plug bolt to the speci-
fied torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Fill with recommended oil to the upper level mark of the oil level gauge.
Reduction oil case capacity: 0.3 (0.32 US gal, 0.26 Imp gal)
Tighten the oil level gauge securely.
MAINTENANCE
(2)
(3)
SAE VISCOSITY GRADES
AMBIENT TEMPERATURE
(1)
(1)
(2)
(3)
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx270t2

Table of Contents