Engine Oil Change; Oil Filter Replacement - Honda GX630 Service Manual

62Z6N000.book 4 ページ ２００９年６月１６日 火曜日 午後６時１７分
MAINTENANCE

ENGINE OIL CHANGE

Drain the oil in the engine while the engine is warm.
Warm oil drains quickly and completely.
Place the engine on a level surface and place a suitable
container under the drain plug bolt (1).
Remove the oil filler cap (2) from the head cover (3) and
the drain plug bolt to drain the oil into a suitable
container.
Please dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it into the ground, or down a drain.
Used engine oil contains substances that have
been identified as carcinogenic.
If repeatedly left in contact with the skin for pro-
longed periods, it may cause skin cancer.
Wash your hands thoroughly with soap and water
as soon as possible after contact with used engine
oil.
Install a new drain plug washer (4) and tighten the drain
plug bolt to the specified torque.
TORQUE: 45 N·m (4.5 kgf·m, 33 lbf·ft)
Fill with recommended oil to the upper level mark of the
oil level dipstick (page 3-3).
Tighten the oil filler cap and install the oil level dipstick
securely.

OIL FILTER REPLACEMENT

Drain the engine oil.
Remove the oil filter (1) using the special tool (2).
TOOLS:
Oil filter wrench 64 mm (2) 07HAA-PJ70100
Apply a light coat of grease to the O-ring (3) of the new
oil filter.
Install the new oil filter and tighten to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Fill with recommended oil to the upper level mark of the
oil level dipstick (page 3-3).
Start the engine and warm up for 1 to 2 minutes.
Check the oil level and if necessary, fill the
recommended oil to the upper mark of the oil level
dipstick (page 3-3).
3-4
(4)
(1)
(2)
(3)
FRONT MOUNT
TYPE:
(2)
(3)
(1)
SIDE MOUNT
TYPE:
(2)
(3)
(1)
(1)
(1)