Modifying The Selected Time Setting - Fujitsu UTB-GCA Operating Manual

6-3-4.

Modifying the selected time setting

Carry out steps 1 to 3 of the "Setting up the weekly
timer operation" procedure.
DAY
Press
change the timer setting.
TIMER
Press
SET
The "WEEKLY1" ON time starts flashing.
TIMER
Press
SET
want to change.
The selected setting flashing on the display. Each
press moves you to the next setting for the selected
day, as follows.
WEEKLY1 → WEEKLY1 → WEEKLY2 → WEEKLY2 → Step 2
ON
TIME
Press
TIMER
Press
SET
DAY
Press
To return to step 2. If you wish to change other time
settings, repeat 2 to 4.
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of "3-3. CONTROL MODE" for details.
66
to select the day that you want to
to enter the setting mode.
several times to select the time you
OFF
to change time setting.
to confirm the setting.
.
ON OFF