Operating Mode Setting - Fujitsu UTB-GCA Operating Manual

5-3. OPERATING MODE SETTING

ACL
CLOCK
ADJUST
DAY TIME
TIMER
MODE
TIMER DAY OFF
COPY
Enter the control mode to select the central control
number (the indoor units) whose operating mode
needs to be changed.
Refer to "3-3. CONTROL MODE" for information
about control modes.
MASTER
Press
CONTROL
The setting is applied to the indoor units associ-
ated with the selected central control number. Be-
cause of the change of the setting, LED
come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of "3-3. CONTROL MODE" for details.
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
SET
TIMER MEMORY GROUP
SETTING SETTING
SET
CHECK TEST
to select the desired operating mode.
FAN
TEMP .
ENERGY
CONTROL
BACK ZONE
SAVE
FILTER
ON OFF
RESET
DELETE
SET will
MASTER
CONTROL
ANTI
FREEZE
35