Fujitsu UTB-GCA Operating Manual page 58

TIMER
Press
MODE
pear on the display. Each time the button is pressed,
the timer function changes in the following order.
TIME
Press
L: Press to advance time.
M: Press to reverse time.
Once the timer time has been changed, press
to confirm the setting.
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of "3-3. CONTROL MODE" for details.
Notes
• To change the set time during operation.
Perform steps 1 → 3
• To change the timer mode during operation.
Perform steps 1 → 2
• To cancel the timer operation.
TIMER
Press the
MODE
operation).
• To stop operation during use of timer mode.
Following the procedures of "5-2. OPERATION / STOP" to stop the operation of the indoor units.
until the segments of the
to adjust the off time.
and set the display to
ap-
TIMER
SET
in step 2 (the indoor units will switch to non stop
57